Tait t2020 - Page 22

20 5-Tone Signaling
2. If the number displayed is the one you wish to
call, press the enter key (
)
to send the call.
The transmit indicator ( ) appears briefly and
the radio may give a short beep, as the call is
transmitted.
3. To call a different number, use the keypad to
enter a new 5-tone number. Once all the digits
are entered, press the enter key (
)
or the star
key ( ) to send the call.
The transmit indicator ( ) appears briefly and
the radio may give a short beep, as the call is
transmitted.
4. When the called party responds, proceed with
your conversation.
In the following example, you wish to make a
5-tone call to number 27587. The sequence of key-
strokes, and the corresponding characters that
appear in the control head display, are shown in the
table below.
Example: Making a 5-tone call to number 27587
Press Key Display
Reads
Meaning
REGION2 Current channel
12345 Enter 5-tone dialing mode.
The last 5-tone number dialed
appears.
2 First digit of the number.
27 Second digit of the number.
275 Third digit of the number.
2758 Fourth digit of the number.
27587 Fifth digit of the number.
27587 Call transmitted.