Tait tm8200 User Manual

Operating in conventional mode 17
Selecting a channel by using a programmed
function key
Press the function key programmed for preset channel.
The programmed channel is now shown in
the display.
Selecting a channel by using the Main menu
1 Select Menu>Channels.
2 In the Channels menu, scroll through
the list of channels until the channel you
want appears.
3 Press Done.
The programmed channel is now shown in
the display.
Selecting a channel by using your Quick
Access menu
Note: Your scroll keys may be programmed for channel scroll.
If this is the case, press the scroll key to immediately
begin scrolling through your list of channels.
1 Press one of the scroll keys or to
open the Channels menu.
Alternatively, the left selection key may
be programmed as your Quick Access
menu. In this case, press the left selec-
tion key to access the Zones menu.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz