Tait tm8200 User Manual

Safety and compliance warnings iii
Safety and compliance warnings
Radio frequency exposure information
For your own safety and to ensure you comply with the
Federal Communication Commission’s (FCC) radio
frequency (RF) exposure guidelines, please read the following
information before using this radio.
Using this radio
You should use this radio only for work-related purposes (it is
not authorized for any other use) and if you are fully aware of,
and can exercise control over, your exposure to RF energy. To
prevent exceeding FCC RF exposure limits, you must control
the amount and duration of RF that you and other people are
exposed to.
It is also important that you:
■ Do not remove the RF exposure label from the radio.
■ Ensure this RF exposure information accompanies the radio
when it is transferred to other users.
■ Do not use the radio if you do not adhere to the guidelines
on controlling your exposure to RF.
Controlling your exposure to RF energy
This radio emits RF energy or radio waves primarily when calls
are made. RF is a form of electromagnetic energy (as is
sunlight), and there are recommended levels of maximum
RF exposure.
To control your exposure to RF and comply with the maximum
exposure limits for occupational/controlled environments,
follow these guidelines:
■ Do not talk (transmit) on the radio more than the rated
transmit duty cycle. This is important because the radio
radiates more energy when it is transmitting than when
it is receiving.
■ While you are transmitting (talking or sending data) on the
radio, you must ensure that there is always a distance of
0.9m (35 inches) between people and the antenna. This is
the minimum safe distance.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz