Tait tm8200 User Manual

Customizing radio settings 59
2 In the Silent Operation menu,
choose On.
3 Press Select.
Turning on control-head backlighting
The radio’s display and keypad light up when backlighting is
on. This normally only happens when a key is pressed or a call
is received. There are two ways you may be able to change
the way backlighting operates on your radio:
■ turn on backlighting momentarily, using a programmed
function key, or
■ toggle backlighting between on and off, using either a pro-
grammed function key or the Main menu.
Turning backlighting on momentarily by using
a function key
You may be able to use a programmed function key to turn
backlighting on momentarily. Backlighting remains on for a
few seconds and then turns off.
Alternatively, the function key may be programmed so that:
■ a short key press turns backlighting on momentarily, and
■ a long key press turns backlighting on, and it remains on
until there is a further long key press.
Toggling backlighting on and off by using a
function key
The function key programmed for backlighting toggles the
backlighting between on and off. When backlighting is
turned on, it remains on until the function key is pressed
again.
Turning backlighting on and off by using the
Main menu
When backlighting is turned on using the menu, it remains on
until the setting is changed to off, regardless of radio activity.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz