Operating in MPT trunked mode 43
About status messages
A status message is sent to another party to indicate your
current activity or location, such as “en route” or “at lunch”.
If the radio receiving your message has been programmed
with the same status messages, it will decode and display your
message. If you receive a status message, the message is auto-
matically queued, since a response is not expected.
Selecting a status message
1 Select Main>Send>Status.
2 In the Status menu, scroll through the
list of status messages until the
message you want appears.
Sending a status message
1 When you have chosen a message,
press Options and the Send To
menu opens.
2 In the Send To menu, scroll through the
list of options until the choice you
want appears.
Note: If your radio has a keypad micro-
phone installed, you can choose the
option Send to dialled, then dial the number of the
party you wish to call.
3 Press Send.
The call details appear in the display.
While the call is being setup, you can
cancel the call by pressing Clear.
To Next Page
Loading...
