Tait tm8200 User Manual

Customizing radio settings 55
Customizing radio settings
Your radio’s audible indicators and display settings can be
changed in the Alert Settings menu and the Display
Settings menu.
Note: Unless stated otherwise, these features are common to
radios operating in either conventional mode or MPT
trunked mode.
The following settings are described in this section:
■ changing the volume of radio indicators
■ changing the external alert option
■ changing the volume of keypress tones
■ changing to quiet operation
■ changing to silent operation
■ turning on control-head backlighting
■ changing the level of control-head backlighting
■ changing the contrast of the radio display.
Changing the volume of radio indicators
The volume of all radio indicators can be set to either high or
low. To change the volume of your radio’s indicators, you may
be able to either:
■ use a programmed function key, or
■ use the Main menu.
Changing the volume of radio indicators by
using a function key
The function key programmed for indicator volume toggles
the volume of all radio indicators between high or low.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz