Tait tm8200 User Manual

30 Operating in conventional mode
Activating squelch override by using the
Main menu
1 Select Menu>Radio Settings>
Function Settings>Squelch Override.
2 In the Squelch Override menu,
choose On.
3 Press Select.
The message Squelch override activated
appears in the display.
While squelch override is on, the green
LED flashes continually and the squelch override symbol
appears in the display.
Using your radio in different repeater areas
Your radio may have a group of channels programmed as a
voting group. The channels in the voting group all carry the
same traffic, but from different repeaters. As your radio
moves in and out of different repeater coverage areas, the
best communication channel is automatically selected for
youtouse.
This channel is known as the “home” channel, and will be the
channel you make and receive calls on. While voting is active,
the home channel is shown in the display, the amber LED
glows and the scanning symbol appears in the display.
The section “Selecting a group” on page 18 explains how to
select a group. A group can be either a voting or a
scanning group.
Suspending a channel from a voting group
You may be able to use the function key programmed for
nuisance delete to temporarily delete one of the channels
from the voting group.
When that voting group is next selected, or after the radio has
been turned off and then on, the deleted channel is again
part of the voting group.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz