Tait tm8200 User Manual

34 Operating in MPT trunked mode
Operating in MPT trunked mode
Note: Your radio must have trunking functionality
programmed before it can operate in MPT
trunked mode.
The following topics are covered in this section:
■ changing your operating mode
■ checking that your network is available
■ making a preset call
■ about emergency operation
■ dialling a PABX number
■ dialling a PSTN number
■ receiving a call
■ re-establishing a call
■ checking missed calls
■ about status messages
■ about text messages
■ placing the radio in do-not-disturb mode
■ calls to conventional channels.
Changing your operating mode
The way your radio performs basic functions, such as sending
and receiving calls, depends on the operating mode of your
network. The two operating modes that may be available on
your radio are:
■ conventional mode (see “Operating in conventional mode”
on page 15), and
■ MPT trunked mode.
Changing your operating mode
1 Select Menu>Change mode.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz