Tait tm8200 User Manual

Dialling calls in MPT trunked mode 51
Nokia ANN fleet calls
If your MPT trunked network uses Nokia ANN dialling, the
numbers you dial depend on your fleet size. Fleets are defined
as either large, small or mini. Your radio’s unique number on
the network consists of:
■ a lead number 7, 8 or 9, depending on the fleet size,
■ a zero-, one-, two- or three-digit prefix,
■ a one- or two-digit fleet number, and
■ a two- or three-digit radio unit number.
Note: See your radio provider or network administrator for
Nokia ANN call details.
Finding your radio’s MPT number
To find your radio’s full MPT number:
1 Dial *700.
2 Press the or PTT key.
The name associated with your network
and your radio’s full MPT number
appears.
The number is in the form:
Nokia ANN dialled calls
The following table summarizes the way you dial calls to other
radios and gives an example of each type of call.
Note: In the following dialled numbers, the # terminator is not
necessary if you press the PTT key instead.
Radio unit number
209
Prefix
34
Fleet
2
Lead
7
Call to Dialling code and example
Radio 23 in the same fleet as you
Group 923 in the same fleet
as you
Radio unit number
23
#
Group
923
#

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz