18 Operating in conventional mode
2 Scroll through the list of channels until
the channel you want appears.
3 Press Done.
The programmed channel is now shown in
the display.
Selecting a group
A group is a collection of channels that are grouped together
for either scanning or voting. In the Channels menu, the
group is shown as being a single channel item, e.g. “Scan1”.
The sections “Using your radio in different repeater areas” on
page 30 and “Scanning a group of channels” on page 31
explain how your radio operates once a scan group or voting
group has been selected.
To select a group you may be able to either:
■ use a programmed function key,
■ use the Main menu, or
■ use your quick access menu.
Selecting a group by using a programmed
function key
Press a function key programmed for group scanning.
The programmed group is now shown in
the display, the amber LED glows and the
scanning symbol appears in the display.
Selecting a group by using the Main menu
1 Select Menu>Channels.
To Next Page
Loading...
