Tait tm8200 User Manual

Operating in MPT trunked mode 41
When your call time is about to expire, the
message Call timeout appears in the
display, the red LED flashes and the radio
gives a repeated beep.
Re-establishing a call
The last number recall, unanswered call and callback functions
allow you to re-establish calls using the PTT key.
Last number recall
When an outgoing call has ended, the message Last call to
and the called unit’s identity may appear on the display.
To make a call to that person again, briefly press the PTT key.
Unanswered call
When an incoming call is missed, the message Missed call and
the caller’s identity may appear in the display.
To return the call, briefly press the PTT key.
Callback
When an incoming call has been ended, the message
Last call from and the caller’s identity may appear in
the display.
To make a call to that person, briefly press the PTT key.
Checking missed calls
If you have missed an incoming call, it may be stored in the
call queue, so that you can return the call later. Information
about the last missed call is shown in the display and the
queued call symbol appears.
In the example below, the last call received was a status
message from Car1. This call is the first of three calls stored in
the call queue.
identity of last
unanswered
scroll
type of
position of call
in the call
options available
depend on type of
queued

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz