Operating in conventional mode 15
Operating in conventional mode
The following topics are covered in this section:
■ selecting a zone
■ selecting a channel
■ selecting a group
■ checking that a channel is clear
■ making a call
■ making a local call
■ making a call using your address book
■ making an emergency call
■ sending a status message
■ transmitting at low power
■ ending active calls
■ activating the repeater before a call
■ receiving a call
■ receiving a text message
■ hearing faint and noisy signals
■ using your radio in different repeater areas
■ scanning a group of channels.
Selecting a zone
A zone is a collection of channels and groups. When you
select a zone, only the channels and groups assigned to that
zone are available. To select a zone you may be able to either:
■ use the Main menu, or
■ use your Quick Access menu.
Selecting a zone by using the Main menu
1 Select Menu>Zones.
To Next Page
