Tait tm8200 User Manual

Operating in conventional mode 29
Turning squelch override on and off by using a
function key
1 Press the function key programmed for squelch override to
unmute the radio.
The message Squelch override activated
appears in the display.
While squelch override is on, the green
LED flashes continually and the squelch override symbol
appears in the display.
2 To turn squelch override off, press the squelch override
function key again.
The message Squelch override
deactivated appears in the display. The
squelch override symbol disappears
from the display and the green LED stops flashing.
Turning squelch override on and off by using
the function key programmed for monitor
The function key programmed for monitor may be
programmed so that:
■ a short key press turns monitor on, and
■ a long key press turns squelch override on.
Press and hold the function key programmed for monitor to
override the radio’s squelch.
The message Squelch override activated
appears in the display.
While squelch override is on, the green LED
flashes continually and the squelch override symbol appears
in the display.
Squelch override remains on until there is a further long
key press.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz