Tait tm8200 User Manual

36 Operating in MPT trunked mode
Using the Main menu to make a preset call
1 Select Menu>Preset calls.
2 In the Preset Calls menu, scroll through
the list of calls until the call you want
appears.
3 Press Send.
The call details appear in the display.
While the call is being setup, you can
cancel the call by pressing Clear.
Using your Quick Access menu to make a
preset call
1 Press the left selection key or one of the scroll keys
or to enter the Preset Calls menu.
2 Scroll through the list of names until the
you want appears.
3 Press Send.
The call details appear in the display.
While the call is being setup, you can
cancel the call by pressing Clear.
Dialling a preset call
If your radio has a keypad microphone installed, the preset
calls programmed for your radio can be dialled. To dial the
preset call, you need to know the number associated with the
preset call. There may be up to 100 preset calls programmed.
For information about entering characters using the keypad
microphone, see “About the keypad microphone” on page 5.
To dial a preset call:
1 Dial p, where p is the number of the
preset call.
If your preset call number is the same as
a call to another radio, then you need to

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz