TallyGenicom 2265+ - Interfaces

User guide Emulations
147
✓
✽✽✽✽
<ESC>[4w Set 10 cpi
✓
✽✽✽✽
<ESC>[4y Selecting NLQ or HS printing quality at 10 cpi
✓
✽✽✽✽
<ESC>[4z Line density 8 lpi (= line spacing 1/8 inch)
✓
✽✽✽✽
<ESC>[5{ Select fanfold paper mode tractor 1
✓
✽✽✽✽
<ESC>[6{ Select fanfold paper mode tractor 2
✓
✽✽✽✽
<ESC>[50m Proportional font OFF
✓
✽✽✽✽
<ESC>[50{ Page at print position
✓
✽✽✽✽
<ESC>[51{ Page at tear off position (perforation)
✓
✽✽✽✽
<ESC>[52{ Page at view position
✓
✽✽✽✽
<ESC>[53m Overlining ON
✓
✽✽✽✽
<ESC>[54{ Cut at current line (option)
✓
✽✽✽✽
<ESC>[55m Overlining OFF
✓
✽✽✽✽
<ESC>[5n Request status report
✓
✽✽✽✽
<ESC>[5w Set 12 cpi
✓
✽✽✽✽
<ESC>[5y NLQ or HS with 12 cpi
✓
✽✽✽✽
<ESC>[5z Graphics normal
✓
✽✽✽✽
<ESC>[6~ Initialize the printer
✓
✽✽✽✽
<ESC>[6 SP K Set horizontal pitch to 6 cpi
✓
✽✽✽✽
<ESC>[6w Set 15 cpi
✓
✽✽✽✽
<ESC>[6z Graphics inverted
✓
✽✽✽✽
<ESC>[7w Set 17.1 cpi
✓
✽✽✽✽
<ESC>[7y Proportional font OFF
✓
✽✽✽✽
<ESC>[7z Bit 8 = unchanged
✓
✽✽✽✽
<ESC>[8w Reset double stroke
✓
✽✽✽✽
<ESC>[8y Right justification ON
✓
✽✽✽✽
<ESC>[8z Set bit 8 = 0
✓
✽✽✽✽
<ESC>[9 SP L Set vertical spacing to 2 lpi
✓
✽✽✽✽
<ESC>[9w Set double stroke
✓
✽✽✽✽
<ESC>[9y Centering ON
✓
✽✽✽✽
<ESC>[9z Set bit 8 = 1
✓
<ESC>[g<n1> <n2><0> Set graphics print to 60 dpi
✓
<ESC>[g<n1> <n2><1> Set graphics print to 120 dpi
✓
<ESC>[g<n1> <n2><11> Set graphics print to 180 dpi
✓
<ESC>[g<n1> <n2><12> Set graphics print to 360 dpi
✓
<ESC>[g<n1> <n2><2> Set graphics print to 120 dpi
✓
<ESC>[g<n1> <n2><3> Set graphics print to 240 dpi
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function