User guide Paper handling
41
Paper transport Loaded paper (fanfold paper/single sheets) can be transported in
the printer in several ways.
Make sure that the printer is in offline mode; press the Online key,
if necessary.
` Key Park (1)
If fanfold paper is loaded in the printer, it is fed to the park position
or the tear position. If a single sheet is loaded, it is ejected.
` Key (2)
Short keypress: Paper is transported upwards step by step.
Long keypress: Continuous transport upwards.
` Key (3)
Short keypress: Paper is transported downwards step by step.
Long keypress: Continuous transport downwards.
` LF/FF key (4):
Short keypress: Line Feed (LF) is executed.
Long keypress: Form Feed (FF) is executed.
The maximum value of the paper return feed is 22 inches.
Offline Trac1
Online
Setup
Park LF/FF
21
3
4
To Next Page
Loading...
