TallyGenicom 2265+ - Setting Subnet Mask (Subnet)

The Menu User guide
74
Use the < (2) or > (3) key to select the desired digit.
Setting Options: 0 to 255
Default Setting: 0
Confirm the setting by pressing the Set key (1).
Set the remaining three digit groups in the same way.
Press the Next key (4) to access the next group of parameters.
Setting Subnet mask (Subnet) Input of the Subnet mask address of the printer.
Press IP Addr (2) key.
This menu level offers the possibility to set the IP address, which is
divided into four digit groups (octet 1 to 4). You can activate octet 3
and 4 by pressing the Next (2) key.
Press OCTET 1 (1) key.
Use the < (2) or > (3) key to select the desired digit.
Setting Options: 0 to 255
Default Setting: 0
Confirm the setting by pressing the Set key (1).
Set the remaining three digit groups in the same way.
OCTET 1= 0 *
Online
Setup
Set < > Exit
21
3
4
Subnet IP Get M
Online
Setup
Back Next
21
3
4
OCTET 1 OCTET 2
Online
Setup
Back Next
21
3
4
OCTET 1= 0 *
Online
Setup
Set < > Exit
21
3
4