Paper handling User guide
42
Moving the paper to the
tear position
You can use the Tear key to move the paper to the tear position.
Swing the soundproofing cover towards the front (see below). The
tear edge is located at the front side of the paper output opening.
Make sure that the printer is in online mode. If necessary, press the
Online key.
Press the Tear (4) key. The printer moves the perforation edge of
the fanfold paper to the tear edge.
The display alternates between…
and…
Tear off paper at the tear edge A.
Make sure you tear the paper off
straight, otherwise a paper jam may
occur.
Online Trac1
Tear
Online
Setup
21
3
4
Tear position
Trac1
Online
Setup
21
3
4
Online Tear
Exit
Online
Setup
21
3
4
A
To Next Page
Loading...
