TallyGenicom 2265+ - Page 160

Emulations User guide
150
✓
✓
<ESC><EM>1 Bin 1 rear (ASF-R), option
✓
✓
<ESC><EM>2 Bin 2 front ( ASF-F), option
✓
✓
<ESC><EM>4 Select single sheet operation
✓
✓
<ESC><EM>R Print page
✓
✓✓✓
<ESC>F Bold OFF
✓
✓
<ESC>g Set character pitch to 15 cpi
✓
✓✓✓
<ESC>G Set double stroke
✓
✓✓✓
<ESC>H Reset double stroke
✓
<ESC>H Set horizontal tab at current printhead position
✓
✓
<ESC>I<n>
n = 0, 8: Draft; n = 4, 12, 20: Draft DLL/n = 0, 8: HS; n = 4, 12, 20: HS DLL
✓
✓
<ESC>j<n> Single line feed back n/180 inch
✓
✓
<ESC>j Set printer to Off Line
✓
✓✓
<ESC>J<n> Single line feed n/180 inch
✓
<ESC>J<n> Single line feed n/216 inch
✓
✓
<ESC>k<n> Select font
✓
✓✓✓
<ESC>K<n1> <n2> Set graphics print to 60 dpi
✓
✓
<ESC>l<n> Set left margin
✓
✓
<ESC>l<n> Select print mode
✓
✓✓✓
<ESC>L<n1> <n2> Set graphics print to 120 dpi
✓
✓
<ESC>M Set character pitch to 12 cpi (Elite)
✓
✽✽✽✽
<ESC>n Character generator LS2
✓
✓✓
<ESC>N<n> Set perforation skip
✓
✽✽✽✽
<ESC>o Character generator LS3
✓
✓✓✓
<ESC>O Reset perforation skip
✓
✓
<ESC>p<n> Proportional font ON/OFF
✓
✓
<ESC>P Set character pitch to 10 cpi (Pica)
✓
✓
<ESC>P<n> Proportional font ON/OFF
✓
✓
<ESC>Q<35> Deselect printer
✓
✓
<ESC>Q<n> Set right margin
✓
✓
<ESC>r<n> Select colour (reserved)
✓
✓
<ESC>R Reset all tabs
✓
✓
<ESC>R<n> Select national character set
✓
✓✓✓
<ESC>S<n> Superscript or subscript ON
✓
✓✓✓
<ESC><SI> Condensed printing 17.1 cpi ON
✓
✓✓✓
<ESC><SO> Double-wide printing ON
✓
✓
<ESC><SP><n> Set character spacing
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function