2 - Quick Guide
2. Press the F3 (
LIBRARY
) button to open the library
list.
3. Use the JOG/DATA dial to select (blue highlight) an
item from the list and then press the F4 (t) button
to load the appropriate setting from the library.
Load the appropriate setting from the library.
COMP MULTI
is displayed.
TIP
On the
COMP MULTI
screen, you can also change the
parameters.
4. Press the F4 (
ON
) button to turn the compressor on.
The indication
OFF
changes to
ON
.
5. Press the F1 (g) button to return to the Mastering
screen.
6. Press the PLAY (7) button on the Mastering screen
to listen to the master file with compression.
NOTE
If the
EQ
item is set to
ON
on the
EQUALIZER
screen,
the effect of the equalizer on the sound will also be heard.
Using normalizing
ª
Normalizing maximizes the volume of the master file.
1. When Recorder mode is
Mastering
mode, press
the F4 (
NORM
) button to open the
NORMALIZE
screen.
2. Press the F2 (
YES
) button to perform the
normalization.
3. Once the process is completed, the display returns
to the Mastering screen.
Using the noise shaper
ª
You can use this function to reduce the quantization
distortion.
1. When Recorder mode is
Mastering
mode, press
the F3 (
NSD
) button to open the
NOISE SHAPED
DITHERING
screen.
2. Press the F4 (
ON/OFF
) button to set the noise
shaper to
ON
.
3. Press the F1 (g) button to return to the Mastering
screen.
Re-recording the master file
ª
Re-record the master file with equalization and
compression applied to create a new master file.
1. When Recorder mode is
Mastering
mode, press
the RECORD (0) button.
2. This will record over the master file and create a
new master file with equalization and compression
applied.
To Next Page
Loading...
Need help?
General
