EasyManuals Logo

Tascam Digital Portastudio DP-24 User Manual

Tascam Digital Portastudio DP-24
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
TASCAM DP-24 51
6 - Basic Recording
4. Set canceling (undo) operations.
LEVEL 1 (Default)
HISTORY LIST
is not displayed when you press
the UNDO/REDO button. In other words, this returns
the unit to the state before the last operation (single
operation). (To cancel the undo, perform REDO.)
LEVEL 10
When you press the UNDO/REDO button,
HISTORY
LIST
appears and you can return to the state before
up to 10 past operations.
NOTE
Even when you change from
LEVEL10
to
LEVEL1
,
the history for a maximum of 10 actions remains stored.
The position of the cursor on the list shows the current
position.
Undoing the last operation (single
undo)
Press the UNDO/REDO button to return to the state
before the last operation.
After doing this, the UNDO/REDO button lights, showing
that redo (see below) is possible.
Canceling an undo operation (redo)
ª
Press the UNDO/REDO button when it is lit.
The last action is enabled again, the unit returns to its
newest state, and the UNDO/REDO button becomes unlit.
Undoing previous operations (multi-
undo)
To perform the multi-undo, first you must set
Undo
History
on the
PREFERENCE
menu to
LEVEL10
.
(See "Setting the undoing feature" on page 50.)
1. Set
Undo History
on the
PREFERENCE
menu
to
LEVEL10
.
2. When the Home screen is displayed, press the
UNDO/REDO button to display
HISTORY LIST
.
The maximum number for the undo history is 10. In
other words, a maximum of 10 operations can be
undone.
This operation is called "multi-undo" because it allows
you to undo multiple events and return to an earlier
state.
3. Use the JOG/DATA dial to select (blue highlight) the
event that you want to return to (all events after
the selected event will be undone).
4. Press the F4 (t) button.
The multi-undo is performed and the song is
restored to the state just after the selected event was
performed.
In this state, the UNDO/REDO button lights.
The event information undone through the above
operation is not erased. The unit has simply been
returned to a previous state.
On the
HISTORY LIST
screen, 0 icon appears
next to the last event after undoing. When the
most recent event is selected on
HISTORY LIST
,
pressing the F4 (t) button returns to the most recent
operation.
CAUTION
When saving a song, a maximum of 10 operation
history events can be saved with the song data. If the
number of operation history events exceeds 10, the
oldest events in the history are erased. These erased
events cannot be restored.
Since the history information is stored as the song
information, even when the power is turned off
(standby), the previous operation remains stored,
so the undo operation is also possible next time the
power is turned on.
If you perform an operation that is added to the history
when the UNDO/REDO button is lit after a multi-undo
operation has been performed, the history after the
multi-undo will be erased.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tascam Digital Portastudio DP-24 and is the answer not in the manual?

Tascam Digital Portastudio DP-24 Specifications

General IconGeneral
Tracks24
Simultaneous Recording Tracks8
Storage MediaSD/SDHC card
Digital OutputNo
Inputs8 XLR/TRS combo jacks
Phantom PowerYes
Built-in EffectsReverb, Chorus, Delay, EQ
DisplayColor LCD
USBUSB 2.0
Weight6.2 kg
OutputsStereo output, monitor output
Headphone Output1/4" stereo
Resolution24-bit/48 kHz
Power SupplyAC adapter

Related product manuals