3 – Names and Functions of Parts
Screen operations
Use the MENU button and dedicated buttons to open
screens, and then follow the guidelines below to use the
functions on the screens.
These examples show basic operation procedures, but
the actual assignments of the function buttons (F1 to F4
buttons) vary depending on the screen.
Use the
•
JOG/DATA dial or the CURSOR (5/b/g/t)
buttons to select (green highlight) the desired item.
This example shows the
MENU
screen.
The
SONG
menu item is selected on this screen.
NOTE
About function buttons
The assignments of the function buttons (F1 to F4) are
shown at the bottom of the screen above the buttons
themselves.
"4" above the F2 button shows that "4" is assigned to the
F2 button when using this screen.
In this manual, the function assigned to a function button
is described as F2 (4) button, for example.
In this way, "
INFO
" is assigned to the F3 button, and "t"
is assigned to the F4 button.
When an item has a sub-menu, "
•
t" appears on its right
side, and the F4 (t) button is used to open it.
On the sub-menu, you can press the
•
F1 (g) button to
return to the previous screen.
This example shows the
LOAD
screen.
On the sub-menu, use the JOG/DATA dial or the
CURSOR (5 /b) buttons to select
LOAD
, and then
press the F4 (t) button to load the song.
When the cursor (blue highlight) is on a setting value,
•
use the JOG/DATA dial to change the value.
To select an item, use the CURSOR (5/b) buttons.
This example shows the
PREFERENCE
screen.
Use the JOG/DATA dial to change the value.
Move the cursor (blue highlight) up or down.
When you have to move left or right, use the
•
CURSOR
(g/t) buttons.
Press the
•
HOME button to return to the Home Screen.
To Next Page
Loading...
Need help?
General
