GTS Technical Manual
14. March 2014 Edition: V1.00/2014 5-9
Copyright © 2014, Diversey Care
05.54.20 tank cover and tank - fresh water tank - 30_V1.00.fm
Open the fresh water tank slowly and disconnect the angle nipple (06/
107) from the filter (06/102).
• Remove the hose clamp (06/126) from the fresh water hose (06/
115).
• Remove the fresh water hose from the angle nipple of the fresh
water tank.
• Pull out the two suction hoses (02/124, 125) from the fresh
water tank (02/119).
• Remove the hose (06/121) from the quick connector (02/112) to
the option tool.
• Disconnect the wires at the appropriate place.
• Remove the screw (02/121) of the cable hose clamp (02/117).
• Remove the cable hose clamp.
• Remove the two screws (02/127) of the angle flange (02/116).
• Remove the angle flange.
• Thread out the wires from the fresh water tank.
• Remove the two screws (03/140) from the two tank bolts (03/
144, 145).
Picture 15: Fresh water tank fixation
• Lift the fresh water tank off the chassis (03/105).
• According to what you need to exchange, remove the existing
parts from the fresh water tank an place it onto the new one.
To Next Page
Loading...
