GTS Technical Manual
14. March 2014 Edition: V1.00/2014 5-15
Copyright © 2014, Diversey Care
05.58.31 brush & motor - brush motor - 30_45_V1.00.fm
5.3 Brush & Motor
5.3.4 Mounting of brush motor
Picture 23: Mount brush motor
• Mount the brush motor.
• Mount the brush motor fixation screws.
Remarks
Make sure that the key (30:04/104, 45:05/104) of the motor is
correctly positioned, as it has to fit into the axle.
Ensure that the motor cover (30:04/118, 45:05/118) is correctly
mounted onto the brush motor.
Picture 24: Brush motor cover
• Connect brush motor plug.
• Mount brush motor belt according to chapter MOUNTING OF
BRUSH MOTOR BELT.
• Close fresh water tank according to chapter MOUNTING OF
FRESH WATER TANK ASSEMBLY.
To Next Page
Loading...
