GTS Technical Manual
14. March 2014 Edition: V1.00/2014 5-10
Copyright © 2014, Diversey Care
05.54.20 tank cover and tank - fresh water tank - 30_V1.00.fm
5.2 Tank cover and tank
5.2.2 Mounting of fresh water tank assembly
Picture 16: Fresh water tank assembly
• Mount the necessary parts onto the new fresh water tank.
• Position fresh water tank on the chassis.
• Mount the two screws from the two tank bolts.
• Mount the hose onto the quick connector of the option tool.
• Thread in the two suction hoses into the fresh water tank hole.
• Mount the water hose onto the tank connector.
• Thread in the wires into the fresh water tank.
• Mount the angle flange and the two screws.
• Mount the cable hose clamp and the screw onto the tank.
• Connect the wires at the appropriate place.
Close the fresh water tank slowly and connect the angle nipple (06/
107) onto the filter (06/102).
To Next Page
Loading...
