3
TCS 3000 Installation
www.tcsmeters.com Total Control Systems
Receipt & Inspecon
Upon receipt of register shipment, be sure to inspect the packaging and the register assembly for any damage before
signing the receipt of the shipment. Nofy the delivery company about possible damage and refuse receipt of the ship-
ment.
Registers are individually boxed and are protected with stac resistant packing material. Each package is idened
with the register assembly part number, descripon and serial number. Verify the register model is the correct model,
size, and conguraon as ordered. Contact your distributor if there is any discrepancy or queson.
Register assemblies should be handled with appropriate methods for the size and weight involved. Appropriate cloth-
ing and shoes need to be ulized. Transport the register package to the installaon site with appropriate transporta-
on methods, careful not to damage the register.
Be careful of any loose or protruding staples from the packaging, as they can be very sharp and may potenally cause
injury.
If foam has been used to protect register, carefully remove top foam layer before aempng to remove register as-
sembly from box. Foam packaging maybe formed around the register assembly making it dicult to remove. Do not
li the register assembly by wires or anything other than the metal body of the register. Do not insert objects or cables
into the register unless stated. Removing register assembly from packaging without adhering to these warnings may
cause serious injury to you and/or the register.
Appropriate precauons should be taken regarding any personal, environmental and material compability with the
end use system.
Noce
Total Control Systems (TCS) shall not be liable for technical or editorial errors in this manual or omissions from this
manual. TCS makes no warranes, express or implied, including the implied warranes of merchantability and tness
for a parcular purpose with respect to this manual and, in no event, shall TCS be liable for special or consequenal
damages including, but not limited to, loss of producon, loss of prots, etc.
The contents of this publicaon are presented for informaonal purposes only, and while every eort has been made
to ensure their accuracy, they are not to be construed as warranes or guarantees, expressed or implied, regarding the
products or services described herein or their use or applicability. We reserve the right to modify or improve the de-
signs or specicaons of such products at any me.
TCS does not assume responsibility for the selecon, use or maintenance of any product. Responsibility for proper se-
lecon, use and maintenance of any TCS product remains solely with the purchaser and end-user.
All rights reserved. No part of this work may be reproduced or copied in any form or by any means – graphic, elec-
tronic or mechanical – without rst receiving the wrien permission of Total Control Systems, Fort Wayne, Indiana
USA.