TCS 3000 - PRODUCT PRICES

31
TCS 3000 Installation
www.tcsmeters.com
Total Control Systems
BLACK
WHITE
RED
BROWN
BLUE
BLACK
Installaon Procedure — Sierra Cellular Modem
EXTERNAL POWER SOURCE
Installaon Procedure
1. Wire the 9DB Pin Communicaon Cable to the Computer (COMP.) port of
the TCS 3000 register terminal board.
2. Cellular modems come with their own Power Cable & Plug. The Red &
White wire must be wired to the External Power Source (accessory switch)
together. Ground to Baery ground.
3. Antenna must be connected to cellular modem for there to be any acvity.
4. Cellular modems will be required to have proper programming prior to
use.
To make sure proper power and communicaon is achieved with your cel-
lular modem, the LED operaon will be illustrated as below:
RED ( + )
WHITE ( + )
4-Pin Power Connector
BLACK ( - )