TDK-Lambda G10-500 - Page 102

94
GOUT <Bool>
Function
Refer to OUT command description.
Parameter
0|1, OFF|ON
Returns
No reply
GPV <NR2>
Function
Refer to PV command description.
Returns
No reply
Model Rated Output
Voltage (V)
Minimum (V)
Maximum (V)
10
0
10
20
0
20
30
0
30
300
0
300
600
0
600
Table 5-4: Voltage Programming Range
NOTE:
The Power Supply can accept values higher by 5% than the table values.
However, it is not recommended to program the Power Supply above the rated values.
Model
Minimum (A)
Maximum (A)
10-500
0
500
20-250 0 250
30-170 0 170
300-17 0 17
600-8.5 0 8.5
Table 5-5: Current Programming Range
NOTE:
The Power Supply can accept values higher by 5% than the table values.
However, it is not recommended to program the Power Supply over the rated values.