TDK-Lambda G10-500 - Measure Subsystem

108
GLOBal:*RCL <NR1>
Function
Refers to *RCL <NR1> command description.
Parameters
1,2,3,4
GLOBal:*RST
Function:
Refers to *RST command description.
GLOBal:*SAVe <NR1>
Function
Refers to *SAV <NR1> command description.
Parameters
1,2,3,4
GLOBal:CURRent[:AMPLitude] <NRf+>
Function Refers to [SOURce]:CURRent[:LEVel][:IMMediate][:AMPLitude] <NRf+>
command description.
Units
A
GLOBal:OUTPut[:STATe] <Bool>
Function
Refers to OUTPut[:STATe] <Bool> command description.
Parameter
0|1, OFF|ON
GLOBal:VOLTage[:AMPLitude] <NRf+>
Function Refers to [SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude] <NRf+>
command description.
Units
V
5.14.5 Measure Subsystem
MEASure:CURRent[:DC]?
Query
Returns a measured output current.
Return
<NR2> - Current in Amperes, 5 digits format.
MEASure:VOLTage[:DC]?
Query
Returns a measured output voltage.
Return
<NR2> - Voltage in Volts, 5 digits format.
MEASure:POWer[:DC]?
Query
Returns a measured output power.
Return
<NR2> - Power in Watts, 5 digits format.