6. LSServer, Scanner Shell and Download
6-88 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 2004-11
Log Ole Interface
In the Instrument menu, select Connect to connect the instrument.
In the Advanced menu, select
Log Ole Interface.
The
Log Ole Interface option disables / enables the logging of LSServer data.
When the
Log Ole Interface option is selected (√), the LSServer data log will be
activated.
When the
Log Ole Interface option is cleared, the LSServer data log will be
deactivated.
Show Logfile
In the Instrument menu, select Connect to connect the instrument.
In the
Advanced menu, select Show Logfile.
The
Show Logfile option starts the standard Windows editor (i.e. notepad) and
shows the LSServer log file.
When the
Show Logfile option is selected (√), the LSServer.log file will be
opened.
When the
Show Logfile option is cleared, the LSServer.log file will not be
opened
.
Lamp Control…
In the Instrument menu, select Connect to connect the instrument.
In the Advanced menu, select
Lamp Control…
The
Lamp Control dialog box is used to select lasers and laser power.
For further information refer to the chapter Laser Control description in this
manual.
In the
Lamp Control dialog box specific lasers (1-4) can be activated /
deactivated and laser power can be set (Laser 4).
Help Menu
About
In the Help menu, select About….
Information about the Scanner Shell program, the version number and Copyright
are displayed in the
About dialog box.
To Next Page