6. LSServer, Scanner Shell and Download
6-62 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 2004-11
6.3.9 Slide Adapter Format
The Slide Adapter Format group contains the following elements:
Load button Click the Load button to open the Open Slide Adapter Format
dialog box: SAF can be selected.
See Slide Adapter Format for more information.
6.3.10 Slides to Process
The Slides to process group gives a general view of the slide / plate format
used and the arrangement of available
scan areas. Scan areas that will be
scanned after pressing
Start / Prescan button are green, those that will not be
scanned are dark gray.
The selection can be changed in the Measurement dialog box. Click on a slide to
toggle its selection. For Prescan, only the first selected slide will be scanned.
Scanlist
A scan list is a text file (.txt) for batch processing:
(e.g.: created with Notepad or Microsoft Text Editor)
Example1:
S,160,0,633,670,0,0
Scan Mode: S ( Single ), DS ( Dual Sequential), DP ( Dual Parallel )
Gain Channel1:160, Gain Channel2: 0
Laser Channel1:633
Filter Channel1:670
Laser Channel2:0
Filter Channel2:0
In this example, a single scan is performed with a gain of 160, with red laser and
red filter.
The text file must be located in the same folder as ArrayPro32.exe file. (Default
folder
C:\ArrayPro4.5).
To Next Page
Loading...