tecan ls series - File Types Used in Scanner Shell

6. LSServer, Scanner Shell and Download
6-66 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 2004-11
6.4.4 File types used in Scanner Shell
The following file types are used with Scanner Shell:
File Type File
Extension
Description
Measurement
Parameter
.lsp Measurement data is saved as .lsp files.
Slide adapter
f
ormat
.saf Slide adapter format data is saved as .saf
files.
Gain
calibration
.dat
.cvs
Gain calibration data is saved as
GainCalibration.dat files.
Gain calibration data is stored as a comma
separated list (.cvs files). For analysis these
files can be loaded in Excel or another
calculation program.
Crosstalk
calibration
.dat Crosstalk data is saved as CrosstalkCor.dat
files.
Log
.log
.log1 - .log5
Log file data is saved in the following file
format:
• LSServer.log:
A record of current measurement data.
• LSServer.log1 - LSServer.log5:
A record of earlier measurement data.
Note
Each time the Scanner Shell is started, the LSServer.log file is
overwritten; old data is saved in LSServer.logn file.