tecan ls series - 3. Installation; 3.1 Unpacking & Inspection

3. Installation
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 3-1
3. Installation
3.1 Unpacking & Inspection
The delivered container includes the following:
• Instrument
• PC
• PC Monitor
• Manual
• Software: Driver LS Series Scanner (1 CD-ROM)
• Cables (RS232 cable and 1 interface cable)
• Slide Adapters
• Filter Slide
• Reference slides (histological section of mouse; spots)
• Array Pro Software
• Hardware Key Array Pro SW
• Installation CD Array Pro SW
• Array Pro User Manual
• Scattered light glass slide
• Filter Slide for Calibration
• 2 Filter Slides
Caution
Before the instrument is installed and switched on, it should be left to
stand for at least three hours, so there is no possibility of condensation
causing a short circuit.