6. LSServer, Scanner Shell and Download
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 6-1
6. LSServer, Scanner Shell and
Download
6.1 Introduction
6.1.1 Overview
LSServer and Scanner Shell are software applications designed to give the user
an easy and flexible way to operate Tecan LS SERIES SCANNER instruments.
LSServer is called up in Array Pro 4.5, a special tool for analyzing microarrays,
and Scanner Shell.
LSServer Functions:
• Connecting to LS Series Scanner
• Preparing measurement parameters in order to get the best results in
scanning
• Scanning in different modes
Scanner Shell Functions:
• Connecting to Tecan LS Series Scanner
• Preparing measurement parameters in order to get the best results in
scanning
• Calibrating LS Series Scanner instruments
• Creating special formats for scanning different plates and slides
• Filter Definition
• Stacker Setup
LSDownload is a software tool needed for downloading new firmware versions to
LS SERIES SCANNER instruments.
For details on
• data analysis, see the corresponding Array Pro 4.5 operating manual.
• instrument features and technical description refer to the Tecan LS Series
Scanner operating manual.
6.1.2 Hardware Requirements
The following hardware requirements are needed for LSServer and Scanner
Shell:
Hardware Minimum Recommend
Memory 512 Mbytes 1 Gbyte
CPU Pentium III 1 GHz Pentium IV 1.7 GHz
Resolution 1024 x768 1280 x 1024
Serial Ports 2 2
To Next Page
Loading...