tecan ls series - File Types Used in Lsserver

6. LSServer, Scanner Shell and Download
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 6-9
6.3.3 File Types used in LSServer
The following file types are used with LSServer:
File Type File
Extension
Description
Image
.tif Scanned image files are saved in a 16bit TIF
format (Tagged Image File)
Measurement
Parameter
.lsp Measurement data is saved as .lsp files.
Slide adapter
f
ormat
.saf Slide adapter format data is saved as .saf files.
Gain
calibration
.dat
.cvs
Gain calibration data is saved as
GainCalibration.dat files.
Gain calibration data is stored as a comma
separated list (.cvs files). For analysis these
files can be loaded in Excel or another
calculation program.
Crosstalk
calibration
.dat Crosstalk data is saved as CrosstalkCor.dat
files.
Focus
.tif Focus image files are saved as
• Focus1.tif for first autofocus scan
• Focus2.tif for second autofocus scan
• Focus3.tif for third autofocus scan (only
created during MTP-autofocus)
Log
.log
.log1 -.log5
Log file data is saved in the following file
format:
• LSServer.log:
A record of current measurement data.
• LSServer.log1 - LSServer.log5:
A record of earlier measurement data.
Note
Each time the LSServer is started, the LSServer.log file is overwritten;
old data is saved in LSServer.logn file.