tecan ls series - Page 85

6. LSServer, Scanner Shell and Download
2004-11 Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5 6-55
The Slide Settings tab also contains the following buttons:
OK
button
Click
OK to save the selected options and close the dialog box.
Cancel
button
Click
Cancel to close the dialog box without saving the options.
Help
button
Click
Help to display the online help for the dialog box.
Filename
Filename
group box
In the Filename group box a standard name for the scanned image can be
selected. This name will be part of the image filename shown later as the title of
the image window.
The
Filename group box contains the following elements:
• Select the
Use standard name check box to enter the name in the
standard name edit box. The name gets part of the image filename.
Normally, the standard image filename is grouped as follows:
Standard name + Filename Format
The Filename Format cannot be changed. It is fixed to:
▪ Barcode - excitation wavelength - slide position - current date - image
counter, - if a barcode reader is installed and if the barcode option is
selected.
▪ Excitation wavelength - slide position - current date - image counter, -
if no barcode reader is installed.
• In the
standard name edit box the image name must be entered. The
following limits must be considered:
▪ Maximum name length: 50 characters
▪ Input data allowed:
Alphanumerical data A -Z, a-z, digits 0-9 and underline.
Clear the
Use standard name box to enable the Filename grid column (see
Measure grid box / Filename grid column)