9
4 Specifications
Q General
Power supply AC 220 V to 240 V,
50/60 Hz (E)
AC 120 V, 60 Hz (PP)
Power consumption 85 W
Power Consumption in standby
mode
Approx. 0.3 W
Dimensions (W x H x D)
430 mm (16
15
/
16
”) ×
148 mm (5
13
/
16
”) ×
428 mm (16
27
/
32
”)
Mass Approx. 12.3 kg (27.2 lbs)
Operating temperature range 0 °C to +40 °C
(+32 °F to +104 °F)
Operating humidity range 35% to 80% RH
(no condensation)
Q Amplifier section
Output power 70 W + 70 W (1 kHz, T.H.D. 0.5
%, 8 Ω, 20 kHz LPF)
140 W + 140 W (1 kHz, T.H.D.
0.5 %, 4 Ω, 20 kHz LPF)
Load impedance 4 Ω - 16 Ω
Frequency response
PHONO (MM) 20 Hz to 20 kHz (RIAA DEVIA-
TION ±1 dB, 8 Ω)
LINE 5 Hz to 80 kHz (—3 dB, 8 Ω)
DIGITAL 5 Hz to 90 kHz (—3 dB, 8 Ω)
Input sensitivity/Input impedance
PHONO (MM) 2.5 mV / 47 kΩ
LINE 200 mV / 22 kΩ
Q Terminals section
Headphones Jack
Stereo, Ø6.3 mm (
1
/
4
”)
0.75 mW, 32 Ω
PC REAR USB
Type B Connector
Analogue input
LINE IN × 2 Pin jack
PHONO (MM) Pin jack
Digital input
OPT IN × 2 Optical terminal
COAX IN × 2 Pin jack
Format support LPCM
Analogue output
LINE OUT Pin jack
PRE OUT Pin jack
System port
System control
Ø3.5 mm (
1
/
8
”), jack
Q Format section
USB-B
USB Standard USB 2.0 high-speed USB
Audio Class 2.0, Asynchronous
mode
DSD control mode ASIO Native mode, DoP mode
Note:
O Specifications are subject to change without notice.
O Mass and dimension are approximate.
O DSD is a trademark of Sony Corporation.
To Next Page
Loading...
Need help?
General
