Technogym GROUP CYCLE - Page 28

GROUP CYCLE: Service & Maintenance manual rev. 6.4
Page 6.8
6. Apply some Loctite 243 to grub screws (b).
Holding the pedal in position with a spanner,
tighten the grub screw.
CAUTION: lock down the gru
b screws
using a torque wrench set for 40Nm.
ATTENTION: the grub screws (b
) are
different for right and left pedal,
distinguishable from the colour:
- RIGHT

BLACK
- LEFT  WHITE.
It’s suggested to wait at least 1 hour before using the machine, so that the loctite can
properly act and dry thoroughly.