Page 9.1
9 REQUIRED TOOLS
The following tools are required for carrying out the various disassembly, adjustment and
maintenance action on the machine:
• Small Phillips screwdriver;
• Medium Phillips screwdriver;
• 10mm wrench;
• 15mm wrench;
• 17mm wrench;
• 19mm wrench;
• 3mm hexagonal wrench;
• 4mm hexagonal wrench;
• 5mm hexagonal wrench;
• 6mm hexagonal wrench;
• 8mm hexagonal wrench;
• Ring nut spanner;
• Torque wrench;
• Bicycle pedal extractor;
• Cutting nippers.
You can order a complete set of hexagonal wrenches consisting of 7 pieces: 2, 2.5, 3, 4, 5,
6 and 8 mm. The code to be used is R0003677AA.
To Next Page
Loading...
