Technogym GROUP CYCLE - Saddle Play Adjustment

GROUP CYCLE: Service & Maintenance manual rev. 6.4
Page 7.7
7.4 SADDLE PLAY ADJUSTMENT
Figure 7.4-1
1. Check the tightening of the screws.
2. Check the play of clamping devices (a) and
(b).
Figure 7.4-2
3. Check the state of wear of the plastic guides
(c) and (d)
placed under the saddle and
replace them if necessary.
Figure 7.4-3
4.
Check the state of wear of the saddle stem
bushing (e) and possible play on it.
5.
Check the state of wear of the saddle stem
sleeve rack.