Technogym Runrace - Number of Manual Lubrication Cycles; Number of Automatic Lubrication Cycles; Total Lubrication Time

RUNRACE : Service & Maintenance Manual - rev. 2.0
Page 9.7
K m . C O V E R E D F R O M
L A S T L U B R I C A T . = X X X X
After 10 seconds, it automatically goes on to the next view.
9.4.5. NUMBER OF MANUAL LUBRICATION CYCLES
The total number of manual lubrication cycles carried out. The following message appears on the
display:
N O . O F M A N U A L
L U B R I C A T I O N S = X X
After 10 seconds, it automatically goes on to the next view.
9.4.6. NUMBER OF AUTOMATIC LUBRICATION CYCLES
The number of automatic lubrication cycles carried out. The following message appears on the
LCD:
N O . O F A U T O M A T I C
L U B R I C A T I O N S = X X
After 10 seconds, it automatically goes on to the next view.
9.4.7. TOTAL LUBRICATION TIME
The total lubrication time, taking into account both the automatic and manual lubrication cycles.
The following message appears on the LCD:
T O T A L L U B R I C A T I O N
T I M E = X X X s e c .
After 10 seconds the machine reverts to standby mode.
If the machine is not equipped with an automatic lubrication system, the lubrication
parameters are not significant.