Technogym Runrace - Checking and Centering the Tread Belt; Checking the Emergency Button

RUNRACE : Service & Maintenance Manual - rev. 2.0
Page 10.3
10.2.5. CHECKING AND CENTERING THE TREAD BELT
1. With the machine stopped, check the tension of the entire surface of the tread belt, turning it by
hand. If any anomalies are found, call in the authorized Technogym Technical Service or adjust
the tension.
2. With the machine moving at a speed of approximately 10 km/h (7 mph), check the centering of
the tread belt. If any anomalies are found, call in the authorized Technogym Technical Service
or adjust the centering.
10.2.6. CHECKING THE EMERGENCY BUTTON
1. With the machine turned on and moving at a speed of approximately 5 km/h (3 mph), press the
emergency button and check that the machine stops, displaying the message: “EMERGENCY
BUTTON PRESSED: EXERCISE INTERRUPTED” on the LCD.