Tecnoalarm TP8-64 - 5. CONTROL BY KEYPOINT; 5.1 CONTROL BY TP SK6 N KEY READER WITH MINI KEYPAD; 5.2 CONTROL THROUGH TP SKN INTERFACE FOR ELECTRONIC KEYS AND ATPK KEY READERS; 5.4 CONTROL BY TP SDN ELECTRONIC KEYPAD

TP8-64 - User Manual Index
3
5. CONTROL BY KEYPOINT
5.1 CONTROL BY TP SK6N KEY READER WITH MINI KEYPAD 5-1
5.1.1 Arming 5-1
5.1.2 Disarming 5-3
5.1.3 By-pass 5-3
5.1.4 Release of panic alarm 5-4
5.2 CONTROL THROUGH TP SKN INTERFACE FOR ELECTRONIC KEYS AND
ATPK KEY READERS 5-4
5.2.1 Arming 5-4
5.2.2 Disarming 5-6
5.2.3 By-pass 5-7
5.3 SPECIAL OPERATING CONDITIONS 5-8
5.3.1 False key alarm 5-8
5.3.2 Simultaneous arming by several control units 5-8
5.3.3 Simultaneous arming with code and key 5-8
5.3.4 Automatic disarming for alarm 5-8
5.3.5 Automatic communicator block 5-8
5.3.6 Trouble/general alarm 5-8
5.4 CONTROL BY TP SDN ELECTRONIC KEYPAD 5-9
5.4.1 Arming 5-9
5.4.2 Disarming 5-11
5.4.3 By-pass 5-11
5.4.4 Special operating conditions 5-12
5.5 TX240-3 WIRELESS KEY 5-13
5.5.1 Arming 5-13
5.5.2 Disarming 5-13
5.5.3 By-pass 5-14
5.5.4 Learning 5-14
6. CONTROL BY TELEPHONE
6.1 CALL FOR SYSTEM STATUS CHECK 6-1
6.1.1 System status check 6-1
6.1.2 Arming/disarming 6-1
6.1.3 Remote activation/deactivation of devices 6-2
6.1.4 Remote digital verification RDV 6-2
6.1.5 Opening message 6-3
6.2 RECEPTION OF AN ALARM CALL 6-3