e*Scope
TDS3000B Serie s User Manual
3-93
Remote Broadcast Transmitter Monitoring. A television station needs to
monitor various voltages and waveforms at a remote transmitter site.
An engineer at the transmitter can connect the TDS3000B series
oscilloscope to the station’s LAN and then c onnect the oscilloscope
to the appropriate test points. The television station engineer can
then use e*Scope to remotely monitor the vol tages and waveforms.
Remote Development. Several engineers on a project need to access
waveform and measurement data from a numbe r of remote sites.
Using e*Scope, t he engineers can capture screen hard copies and
waveform data from these remote sites and store the information in a
central database.
To Next Page
Loading...
