Tektronix TDS3000B Series User Manual

Appendix G: Ethernet Set up
G-14
TDS3000B Serie s User Manual
Ethernet Error Messages
The following error messages can occur when you are having
network problems. Read the text that follows to help rectify the
problem.
Print Server Not Responding. This notifier displays when the
oscilloscope attempts to send data to the selected network printer but
the network refuses the connecti on to the network printer. This
usually m ea ns that the network printer server is offline or the print
server IP address is incorrect .
If DNS is available then you can v eri fy the network print server data
by ente ring the print er name and eithe r (but not both) the print server
name or the IP address. The DNS protocol will fill in the missing
data if the user-supplied data is correct.
If DNS is not available, then conta ct your network administrator for
help.
Printer Not Responding. This notifier displays when the oscilloscope
attempts to send data to the selected network printer but the print
server is unable to forward the data to the network print er. This
usually m ea ns that the network printer is offline or the printer name
is incorrect. Conta ct your network administrator to obtain the correct
printer queue name.
DNS Server Not responding. This notifier displays when either the
Domain information (Domain name or IP address) is not correct, or
the print server name or printer server IP address is not validated (via
the Domain Name Server).

Tektronix TDS3000B Series Specifications

General

Brand	Tektronix
Model	TDS3000B Series
Category	Test Equipment
Language	English