Getting Started
1-8
TDS3000B Serie s User Manual
Trigger Features
Dual Triggers. Use the main (A) t rigger system alone or add the B
trigger to capture more com p lex events. You ca n use the A and B
triggers together to set up a wait-for-time or wait-for-events trigger.
Seepage3--59.
Video Trigger. Trigger on vide o fie lds or lines to see a stabl e di splay of
standard video signals. See page 3--69.
Alternating Trigger. Sequentially use each active channel as a trigger
source, from the lowest-numbered act ive channel to the highest-
numbered active channel. See page 3--67.
External Triggering on Four-Channel Instruments. All mode ls have an
external trigger input. Four-channel models have the external trigger
connector on the back of the instrument. Two-channel models have
the external trigger conenctor on the front panel.
Convenience Features
e*Scope Web-based Remote Control. Access your TDS3000B through
the Internet, from across a room to across the world. See page 3--88.
Built-in Ethernet. Connect your TDS3000B Series oscilloscope to the
Internet using the built-in 10BaseT Ethernet port, for e*Scope access
or printing screen images to network printers. See page G-- 1.
Autoset. Use Autoset to quickly set up the verti cal, horizontal, and
trigger cont rols for a usable display. See page 3--4.
Scope QuickMenu. Use the built-in Scope QuickMenu for simplified
oscilloscope operation. See page 1--29.
To Next Page
Loading...
Need help?
General
