Reference
Basic e*Scope Menu
Functions
The previous menu p rovides the following functions:
Home. Home displays the oscilloscope screen.
Applications. Applications takes you to the application URL specified in the
Configure tab.
Configure. Configure lets you specify URLs for the advanced Web-based Control
HTML pages (accessed from the Control menu).
Data. Data provides the basic level of e*Scope control. It lets you upload or
download waveform data files and oscilloscope settings, a s well as remotely
control the oscilloscope using oscilloscope programing commands listed in the
TDS3000, TDS3000B and TDS3000C Series Digital Phosphor Oscilloscope
Programmer Manual.
Status. Status displays the version screen, which shows the firmware version
and lists installed a pplication modules.
Control. Control displays the advanced e*Scope Web-based Remote Control
screen that lets you remotely control the oscilloscope using a graphical interface
that includes on-screen interactive menus and selectable controls for all
front-panel buttons and knobs. You must download the free advanced e*Scope
software from the Tektronix Web site.
Help. Help takes you to the TDS3000 series frequently asked questions page
at www.tektronix.com.
NOTE. You can create your own local Applications and Help files and access
them by changing the Application and Help field in the Configure menu to point to
your local web site containing your files.
TDS3000C Series Oscilloscope User Manual 119
To Next Page
Loading...
