Compliance information
Pollution degree rating
Pollution degr
ee 2 (as defined in IEC 61010-1). Rated for indoor, dry location
use only.
IP rating
IP20 (as defined in IEC 60529).
Measurement and
overvoltage category
descriptions
Measuremen
t terminals on this product may be rated for measuring mains voltages
from one or more of the following categories (see specific ratings marked on
the product and in the manual).
Category II. Circuits directly connected to the building wiring at utilization
points (socket outlets and similar points).
Category III. In the building wiring and distribution system.
Category
IV. A t the source of the electrical supply to the building.
NOTE. Only mains power supply circuits have an overvoltage category rating.
Only measurement circuits have a measurement category rating. Other circuits
within the product do not have either rating.
Mains overvoltage
category rating
Overvoltage category II (as defined in IEC 61010-1).
TDS3000C Series Oscilloscope User Manual xi