206
Gate Length displays the gate length in points. The default gate duration is the duration of the
entire waveform record.
Note
The gating controls interact with the acquisition and frequency domain controls; changing one set
of controls may change the other control settings.
Spectral Setups: Frequency
To Use
Click the individual controls, and use the multipurpose knobs to select the
Center Freq, Freq Span, and Res BW. Click Full to set the frequency span
to full.
Behavior
The maximum frequency span is equal to half of the sample rate. If you
need a higher frequency span, set the sample rate to a larger value.
Note
The frequency domain controls interact with the gating and acquisition controls; changing one set
of controls may change the other control settings.
To Next Page
Loading...
Need help?
General
