351
that are displayed on screen, or Measurements Snapshot to
copy the current snapshot data. If there is no valid
snapshot data, the default snapshot values are copied.
Copy the data
18. Click Copy to save your setup information. The copy
operation takes place after you click Copy.
Creating MyScope Control Windows
Use this procedure to create your own control windows:
Prerequisites
1. Select New Control Window… from the MyScope menu.
Select controls
2. Click a control group to display the available controls
within that group.
3. Click a control. The control displays in the preview
window.
4. Clear the checkbox for any control that you do not want to
appear. Most controls show all controls selected by
default.
Place, move, and delete
the controls
5. Drag the customized control to your MyScope control
window. You can also move a control after it has been
placed in the new control window by dragging it.
6. To remove the control from the custom control window
select it, and then click the Delete button.
Create tabs
7. Click New Tab to add up to eight tabs.
8. Click the Rename Tab to create a unique name for each
tab in your control window.
Set User Preferences
9. Click the User Pref… button, and then select the user
preferences that you want to apply to this control window.
10. By default the preferences are the same as what is
currently set on your instrument. The preferences you set
from the MyScope Setup window only apply to your
MyScope control window. The preferences will take effect
when the MyScope control window is activated.
Save
11. Click Save or Save As… to save your MyScope control
window.
12. Enter a unique name for your MyScope control window
and, click Save. (This name will display in the upper right
corner of the control window when you open it.) The
default location to save MyScope files is
To Next Page
Loading...
Need help?
General
